Today I’d like to share you a little tips about how to use CLI to detect your PRTE board on MA5600T series OLT.
Issue Description:
MA5600T(MA5600V800R005C32B138) has 2 PRTE one of them is damaged so how can we check it from command line.
Alarm Information:
ALARM 2849 FAULT MAJOR 0x15411026 ENVIRONMENTAL
2010-08-12 100424 DST
ALARM NAME Addict power fault alarm
PARAMETERS FrameID 0 EMU ID 0 Digital ID 0 EMU Type FAN
Name Power fault
Name Power fault
DESCRIPTION:
Addict power alert for malfunction
CAUSE: on power problems
ADVICE: power check
Handling process:
A verification Please review the following instructions for information on how to query the power board using the command line.
Should there be two boards, is normal
MA5600T( config)#interface emu 0
MA5600T( config- if- addict- 0)#display fan
alarm| terrain| system} alarm
Command:
display fan alarm
EMU ID 0
— —-
Alarm name Alarm state
— —-
Read temperature fault Normal
Fan block Normal
Temperature high Normal
Power fault Normal
— —-
If one of the power board is failure or doesn’t exists
MA5600T (config- if- addict- 0)#display addict alarm
EMU ID 0
— —-
Alarm name Alarm state
— —-
Read temperature fault Normal Addict block Normal Temperature high Normal Power fault Alarm
— —-
Root Beget
null
Suggestions
Null
Thanks for reading…!
Comments are closed