SSND1PEX2000 is a 2-port 10G Ethernet Switching Processing Board; Part Number03020MTE. SSND1PEX2000 is available in one functional version, namely, N1.
【Problem Summary】PEX1 board cannot show “port utilization” and “port bandwidth utilization” in the RMON , The OSN 3500 version is V2R11C02SPC103.
【Problem Details】Please refer the follow picture.
1, There are two reasons may cause this problem, NMS problem or equipment problem.
2, Check other packet service board PEG8 on NMS, it can show these two RMON items, and check other PEX1 boards, it can not show these two RMON items.
3, Check the product document of this version, it shows that the current version support “port untilization” and “port bandwidth utilization” items.
4, Use command :pm-get-curdata:pmall,0xff,0,0,”” to check from equipment, also can not show the above to items.1, Send all these information to RnD, after RnD locate, it is a software bug that all the current V2R11 versions do not support these two RMON items.
1,From R12C00 and its later versions, there will have PORT_TX_BW_UTILIZATION and PORT_RX_BW_UTILIZATION, they show Tx and Rx width untilization.
2,For these two problem items, RnD will release new versions to solve it, then will optimize this case.
Thunder-link.com now have PEX board and other various board on promotion, more than 86% off list price, please come to visit www.thunder-link.com; or just email for inquire: sales@thunder-link.com
Comments are closed